Canon Inner Finisher-J1 Service Manual page 50

2x
7. Open the Front cover [1], release the lock lever [2].
[2]
[1]
[1]
[2]
[3]
44
8. Remove the Inner Finisher [1].
[1]
CAUTION:
Do not slide the Inner Finisher on the inner part of the
host machine nor bump the Inner Finisher to the covers
of the host machine. Doing those may cause damage
to the exterior of the host machine.
■ Removing this Machine from the
Host Machine. (In the case of Inner
Finisher and Inner Puncher Unit)
1. Open the Front Cover [1] and Front Upper Cover [2].
2. Open the finisher front cover [1] and push the
Disengagement Lever [2].
[1]
3. Slide the Inner Finisher [1].
4. Disassembly/Assembly
[2]
[1]
[2]