Canon imagePASS-R1 Service Manual page 37

Unlocking the HDD, go to WebTools and enter Fiery password. (see
1. Make sure that the imagePASS is powered on.
2. From a client computer, start a web browser and enter the IP address of the imagePASS.
3. Enter WebTools and enter Fiery password (see
WebTools (by selecting Security > User Data Encryption).
NOTE:
If the Fiery password is lost and you were not able to unlock the HDD, you still have five times to try the Fiery password. After all
the attempts fails, you will need to select to delete all data to restore to the factory default.
4. Follow the on-screen instructions to unlock the HDD. After unlocking the HDD, restart the Fiery server.
■ CPU and CPU cooling assembly
The CPU is installed in a socket on the motherboard. Before removing the CPU from its socket, remove the motherboard from
the chassis (see "Removing the motherboard" on page
the cooling assembly from the CPU socket (see
and a heatsink.
NOTE:
Do not remove the CPU fan from the heatsink.
"Unlocking the HDD" on page
"How to obtain the Fiery password" on page
26), disconnect the CPU fan cable from the motherboard, and remove
"To remove a CPU" on page
32
3. REPLACING PARTS
9)
33). The CPU cooling assembly consists of a fan
9) in the Configure