Polaris RZR XP 1000 Owner's Manual page 145

WALKER EVANS RACING® SHOCKS
q
Front Shock Preload Measurement
w
Rear Shock Preload Measurement
FACTORY DEFAULT PRELOAD SETTINGS
RZR XP
RZR XP 4
Follow these guidelines if you make adjustments to this suspension.
• Always return the suspension to the factory setting after the load is removed
from the vehicle. The increased suspension height will negatively impact
vehicle stability when operating without a load.
• Always apply the same adjustment setting to all four wheels.
Do not increase the spring preload by more than one inch (25.4 mm) over the
factory setting.
FACTORY DEFAULT PRELOAD SETTINGS
WALKER
Front
Rear
WALKER
Front
Rear
MAINTENANCE
2.38 inches (60 mm)
6.00 inches (152 mm)
1.25 inches (32 mm)
5.25 inches (133 mm)
143