Polaris RZR XP 1000 Owner's Manual page 115

OIL AND FILTER CHANGE
Spilled oil left on engine components or in the engine area may pose a fire
hazard. Use shop rags to clean any spilled oil. If needed, use a non-flammable
solvent on the rag to aid the cleaning process. Do not use any device such as
pressurized water or air as this may disperse the oil onto engine components
Engine oil is hot after use and can cause burns to skin.
Always change the oil and filter at the intervals outlined in the Periodic
Maintenance Interval Chart.
1. Position the vehicle on a level surface. Place the transmission in PARK.
2. Allow engine to cool down before draining oil.
3. Place a drain pan under the engine crankcase and remove the drain plug
using a 6 mm Allen wrench..
4. Remove the seats and access panel. See the Seat Removal and Access
Panel Removal sections for details.
WARNING
and could pose a fire hazard.
CAUTION
MAINTENANCE
q
113