Toshiba LF150 Instruction Manual page 21

Then tighten the cable connection with a wrench. Tightening torque should be
limited to
that which is sufficient to produce a positive seal for the cable connection.
(5) Repeat (2) to (4) to wire the exciting cable.
(6) Making sure both cables are wired correctly, close the terminal housing cover with
the four retaining screws.
NOTE
To wire signal and exciting cables to the converter, see the instruction manual provided
for each converter.
Figure 4.8 Cable connections
20
— —
６Ｆ８Ａ０９１６
Cable connecting