Overview; Name Of Functions Of Main Parts; Exterior Features - Toshiba CC-Link TOSVERT VF-S11 Option Instruction Manual

1. Overview

This option allows the VF-S11 inverter to be connected into a CC-Link network. CC-Link
supports a maximum of 42 nodes, allowing for the Master unit and this option is based on
CC-Link Ver.1.10.
The CCL002Z is able to operate RUN/STOP, monitor the status of the inverter, set the
inverter's parameter and etc. by the CC-Link master through installing the VF-S11. And it
can use different applications.

2. Name of functions of main parts

2.1. Exterior features

Here are the name and functions of the exterior components of the CCL002Z unit.
SW2-upper
V/I functions of VIA select SW
SW2-under
Input terminal
SINK/SOURCE select SW
Status LED
L.RUN Light on during communication.
SD Light on during send the data of CC-Link.
Light on during received the data of
RD
CC-Link.
L.ERR Light on during communication error
SW1 and SW3
Do not touch this switch.
It uses for only maintenance.
CN2
Optional RJ45 communication port
RJ45 communication option can be
used. However it makes CC-Link
communication be disabled.
CC-Link communication
－ 6 －
E6581422③
SW4
Termination resistors
select SW
Left : 110 ohm
Center : none
Right : 130 ohm
TB1
CC-Link connector
Phoenix Contact corp.
MC 1,5/5-ST-3,81