Direct-In Termination (Dit)-Pri - NEC NEAX 2400 IPX Programming Manual

DIRECT-IN TERMINATION (DIT)-PRI

D-137 DIRECT-IN TERMINATION (DIT)-PRI
1. General Description
This feature automatically routes incoming network exchange calls from an ISDN network and Public/Private
Telecommunication network directly to a preselected station without Attendant assistance. The call can then be
processed by the called party. THREE-WAY CALLING [T-2], CALL TRANSFER [C-10], etc., are handled in
the same manner as any normal trunk call.
2. Operation Procedure
The calling party, outside the system, dials the telephone number as usual. However, the call is answered directly
at a predetermined station, bypassing the ATTENDANT CONSOLE [A-3].
3. Programming
STEP 1: Assign the Basic Data for ISDN. (Refer to
STEP 2: ASYD - System Data 1, Index 147:
STEP 3: ARSC - The DIT target station receiving the call must be assigned a Route Restriction Class (RSC),
STEP 4: ACFR - Designate the type of incoming Call Class Indexes (CCI) which require a Transfer Service
For Day and Night DIT Service-Same Station
STEP 5: ACSI - Assign the Route Number, Trunk Number, and Connection Service Index = 3 for DIT. Then
For Day DIT Service
STEP 6: ACSA - Assign the Route Number, Trunk Number, Connection Service Index A = 2 for DIT. Then
CHAPTER 5
Page 78
Revision 1.0
Note:
System Data 2,Index 11,bit 7:Will the DIT call to a busy station be routed to ATT or queue
allowing the station to be connected to the trunk. The DIT route must be allowed via Route
Restriction Indexes (RRI) 0 & 1.
Feature Index (TSFI) = 3, DIRECT-IN TERMINATION. The type of CCI must match
CDN 6 of the DIT route. For Night DIT (NIGHT CONNECTION-FIXED [N-1]), allow the
CCI a TSFI = 2, NIGHT CONNECTION-FIXED [N-1].
assign the Tenant Number and Station Number to serve as the DIT station.
assign the Tenant Number and Station Number to serve as the DIT station.
Chapter 3, "Basic Data Assignment for
DIT supervisory timer for a busy station.
This index works when System Data 2, Index 11, bit 7=1.
to the busy station?
0/1=ATT/Queue
Note: If the call goes to ATT, it will ring in on the BUSY
or ICPT key.
NDA-24305
ISDN".)