Sony BKM-34H Manual page 11

5
Attach the feet removed in step
1 to the two base frames using
the screws removed in step 1.
6
Assemble the large or small
spacers to the front of the left
and right base frames, using
two screws B (4×8 mm, gold).
First align the projections on
the spacer's plate with the
holes on the base frame, then
fasten screw B.
For the selection of the spacer,
see "Using the Spacers" on page
5.
7
Attach the six cable clamps to
the base frame and the rear
stay, and extend the 9-pin
remote cable through the cable
clamps.
Screw removed in step 1
Foot
Cable clamp
Screw B
Large or small
spacer
Screw B
Large or small
spacer
(Continued)
3 (E)