Assembly - Sony BKM-34H Manual

Assembly

1
Remove the four feet from the
bottom of the BKM-10R.
2
Connect one end of the
supplied 9-pin remote control
cable to the DISPLAY UNIT
connector at the rear of the
BKM-10R, and fasten the
screws of the cable connector.
3
Attach the right and left base
frames to the sides of the
BKM-10R.
To attach each base frame, use
two screws A (4×12 mm,
gold).
4
Place the rear stay on the right
and left base frames and
assemble them using two
screws B (4×8 mm, gold) and
two screws C (4×8 mm, black).
2 (E)
D I S P
Screw A
Screw A
Base frame (right)
Screw C
Screw B
Rear stay
BKM-10R
U N I T
L A Y
9-pin remote
control cable
Screw A
Base frame (left)
Screw C
Screw A
Screwdriver
Screw B