Contents Before Use Tuner Precautions ..............4 Tuner Basic Operation ..........18 How to read this manual ......... 4 Memory Operation ..........19 Selecting Operation ..........19 Basic Operations Traffic Information ...........20 Tuner Setup ..............20 Functions of the Buttons on the Front Panel ... 5 Turning on the Unit ...........
Page 3
Setting Up Monitor Screen Setup ..........37 System Setup .............37 User Interface Setup ..........38 Special Setup .............38 Display Setup .............39 AV Setup ..............40 Controlling Audio Speaker/ X’over setup ..........41 Controlling General Audio ........42 Equalizer Control ............43 Volume Offset ............44 Sound Effect ...............44 Listening Position/ DTA ..........45 Remote control Functions of the Remote control Buttons ..46...
• When you purchase optional accessories, with the USB device connected can damage check with your JVC dealer to make sure that the data stored in the USB device. For how to they work with your model and in your area.
Basic Operations Basic Operations Functions of the Buttons on Turning on the Unit the Front Panel Press the [ ] button. h The unit is turned on. ● To turn off the unit: NOTE Press the [ ] button for 1 second. •...
Basic Operations Getting Started ■ [Camera] Set the parameters for the camera. 1 Touch [Camera]. Initial setup 2 Set each item and touch [ For detailed operation, see Camera Setup Perform this setup when you use this unit first (P.35). time.
Basic Operations Adjusting the volume Touch [User Interface]. To adjust the volume (0 to 40), Press [+] to increase, and press [−] to decrease. Holding [+] increases the volume continuously to level 15. h User Interface screen appears. Touch screen operations Touch [Clock Adjust].
Basic Operations Display the HOME screen Gesture Touch Control: You can also control playback by moving your finger on the touch panel as follows (for some Press the [ ] button. sources, the gesture control is not available). • Sliding the finger towards up/down: - Functions same as pressing [ ] / [ (Media) in the USB Control screen.
Page 9
(P.14) (P.10) It is necessary to connect Android To turn off the AV source smartphone with “Mirroring OA for JVC” application installed and to set [Mode] to [Mirroring for Android™]. (P.14) Touch [ ] on the HOME screen.
Basic Operations Customize Short-cut buttons on Secondary screen HOME screen • [ ] [ ] : The Secondary screen changes every time you touch it. You can also change the You can arrange the position of the source icons Secondary screen by flicking left or right on as you like.
Basic Operations FUNCTION screen List screen There are some common function keys in the Press the [FNC] button. list screens of most sources. h FUNCTION screen appears. Touch to display the FUNCTION screen. Displays list type selection window. The contents of the menu are as follows. •...
APPS APPS Apple CarPlay Operation Apple CarPlay is a smarter, safer way to use your iPhone in the car. Apple CarPlay takes the things you want to do with iPhone while driving and displays them on the screen of the product. You can get directions, make calls, send and receive messages, and listen to the music from iPhone while driving.
APPS To enter Android Auto mode, touch Android Auto™ Operation [Android Auto] icon in the source selection screen. (P.9) Android Auto enables you to use functions of your Android smartphone convenient for driving. You can easily access route guidance, make calls, listen to music, and access convenient functions on the Android smartphone while driving.
Download Mirroring App from the Google Play. Ñ Connecting an Android Install the latest version of the Mirroring smartphone application “Mirroring OA for JVC” on your Android. Connect an Android smartphone via the Pair your smartphone with the unit via USB terminal. Bluetooth.
Connecting a USB device USB Basic Operation Most functions can be controlled from the Connect the USB device with the USB source control screen and playback screen. cable. (P.50) Control screen Press the [ ] button. Touch [ Touch [USB]. (P.9) Ñ...
Page 16
Video screen ] / [ • [ ] : Repeats the current track/folder. Each time you touch the key, repeat mode switches in the following sequence; File repeat ([ ]), Folder repeat ([ ]), Repeat all ([ • [ ] : Randomly plays all tracks in current folder.
Ñ Search Operation Link search You can search a file of same artist/album/genre You can search music or video files by the as the current track. following operations. Touch [Link Search]. Touch [1]. Touch the desired tag type. You can select Touch [S].
Tuner Tuner Tuner Basic Operation Operation keys • [E] [F] : Tunes in a station. The method of Most functions can be controlled from the frequency switching can be changed (see 2 source control screen. in table). To enter Tuner source, touch [Tuner] icon in the •...
Tuner Memory Operation Selecting Operation Ñ Ñ Auto memory Preset select You can store stations with good reception in You can list and select memorized station. memory automatically. Touch [ ] on the right side of the screen. Touch desired band key. Select a station from the list.
Tuner Traffic Information (FM only) Tuner Setup You can listen and watch the traffic information You can set tuner related parameters. automatically when a traffic bulletin starts. Touch [ However, this feature requires a Radio Broadcast Data System that includes the TI information. Touch [ ] on the left side of the screen.
SiriusXM® SiriusXM® SiriusXM® Basic Operation Control screen Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio.
SiriusXM® Storing Channels in Preset Artwork / Function panel Memory • Displays the album artwork for most SiriusXM music channels. You can store the current channel in memory. • Touch [ ] of the screen to display the function Tune in the channel you wish to store in panel.
SiriusXM® Direct search Category/Channel search You can tune in a channel directly. You can specify the desired category and select a channel. Touch [ ] on the left side of the screen. Touch [1]. Touch [Direct Channel]. Select a category. Enter the channel number and touch [Enter].
SiriusXM® Replay SiriusXM Setup You can replay the last 60 minutes of the Touch [ ] on the left side of the screen. program from the current channel. Touch [SETUP]. Touch [L] or [Replay] on the function panel. h SiriusXM SETUP screen appears. See the following sections for each setting.
Page 25
SiriusXM® Ñ Ñ Parental code Parental Control You can set a SiriusXM parental code for Parental The Parental Control feature allows you to limit Control. access to any SiriusXM channels, including those with mature content. When enabled, the Touch [Parental Code] on the SiriusXM Parental Control feature requires you to enter a SETUP screen.
Page 26
SiriusXM® Touch each channel on the list and set to When selecting [User] [ON] or [OFF]. This allows you to limit access to any SiriusXM [ON]: Locks the channel. channel (Parental Lock Channel). [OFF]: Unlocks the channel. Touch [Parental Lock Channel Selection] on the SiriusXM SETUP screen.
Bluetooth Control Bluetooth Control Ñ About the cell-phone and Using the Bluetooth function, various functions Bluetooth audio player can be used: listening to the audio file, making/ receiving a call. This unit conforms to the following Bluetooth specifications: Information for using Bluetooth®...
Bluetooth Control Register from the Bluetooth Bluetooth Setup device Press the [FNC] button. It is necessary to register the Bluetooth audio h FUNCTION screen appears. player or cell-phone to this unit before using the Bluetooth function. Touch [ You can register up to 7 Bluetooth devices. NOTE •...
Bluetooth Control Ñ Connect the Bluetooth device Playing Bluetooth Audio Device Touch [Select Device] in the Bluetooth SETUP screen. Most function can be controlled from the source control screen. To enter Bluetooth source, touch [BT Audio] icon in the source selection screen. (P.9) Ñ...
Page 30
Bluetooth Control Touch the device name you want to Function panel connect. Touch on the left side of the screen to display the function panel. Touch again to close the panel. • [BT DEVICE CHANGE] : Selects the device to connect via Bluetooth audio (A2DP) or APP (SPP).
Bluetooth Control Using Hands-Free Unit ● Bluetooth SETUP 1) Touch [ Bluetooth SETUP screen appears. You can use telephone function by connecting the Bluetooth telephone to this unit. NOTE NOTE • The status icons such as battery and antenna displayed may differ from those displayed on the •...
Page 32
Bluetooth Control Ñ Voice Recognition Call using the preset number You can access the voice recognition function of Touch [ the cell-phone connected to this unit. You can search the cell-phone phonebook by voice. (The Touch the Name or phone number. functionality depends on the cell-phone.) Press the [ ] button.
Page 33
Bluetooth Control Ñ Ñ Receive a call Operations during a call Touch [ ] to answer a phone call or [ to reject an incoming call. ● Adjust the receiver volume Press the [−] or [+] button. NOTE • While monitoring the view camera, this screen does not appear even if a call comes in.
Page 34
Bluetooth Control Ñ Phone number preset ■ [Delete] To delete a preset number, touch [Delete] You can register frequently used phone and then touch [Yes] on the confirmation numbers to this unit. screen. Ñ Touch [ Phonebook transfer Touch [Edit]. You can transfer the phonebook in your Bluetooth smartphone via PBAP.
Other External Components Other External Components Ñ Camera Setup View Camera Press the [FNC] button. NOTE h FUNCTION screen appears. • To connect a camera, see P.50. Touch [ • To use a rear view camera, a REVERSE lead connection is required. (P.50) h SETUP Menu screen appears.
Other External Components External audio/video players— To adjust the parking guidelines AV-IN NOTE • Install the rear view camera in the appropriate Connect an external component to the position according to the instructions supplied AV-IN input terminal. (P.50) with the rear view camera. •...
Setting Up Setting Up Monitor Screen Setup System Setup You can adjust image quality in video screen. Press the [FNC] button. Press the [FNC] button. h FUNCTION screen appears. h FUNCTION screen appears. Touch [ Touch [ h Screen Control screen appears. Adjust each item as follows.
Setting Up User Interface Setup Special Setup You can setup user interface parameters. You can setup Special parameters. Press the [FNC] button. Press the [FNC] button. h FUNCTION screen appears. h FUNCTION screen appears. Touch [ Touch [ h SETUP screen appears. h SETUP screen appears.
Setting Up Display Setup To register original image You can load an image from the connected USB device and set it for the background image. Press the [FNC] button. Before operating this procedure, it is necessary to h FUNCTION screen appears. connect the device which has the image to load.
Setting Up AV Setup You can set AV parameters. Press the [FNC] button. h FUNCTION screen appears. Touch [ h SETUP screen appears. Touch [AV]. h AV screen appears. Set each item as follows. ■ [AV-OUT] Specify whether to output the current source signal from the VIDEO OUT terminal.
Controlling Audio Controlling Audio Speaker/ X’over setup You can adjust the various settings such as audio balance or subwoofer level. Press the [FNC] button. Press the [FNC] button. h FUNCTION screen appears. h FUNCTION screen appears. Touch [ Touch [ h Audio screen appears.
Controlling Audio [Tweeter] (Only for Front) [TW] (Tweeter) [Gain]* ■ ■ You can set the tweeter when you are Adjusts the tweeter level. (When front is selecting front speakers. selected on Speaker Select screen) [None], [Small], [Medium], [Large] [Phase Inversion]* ■...
Controlling Audio Equalizer Control [SW Level] ■ Adjusts the subwoofer volume. You can adjust equalizer by selecting the Ñ Recall the EQ curve optimized setting for each category. Press the [FNC] button. Touch [Preset Select]. h FUNCTION screen appears. Select EQ curve. Touch [ h Audio screen appears.
Controlling Audio Volume Offset Sound Effect Finely adjust the volume of the current source You can set sound effects. to minimize the difference in volume between Press the [FNC] button. different sources. h FUNCTION screen appears. Press the [FNC] button. h FUNCTION screen appears.
Controlling Audio Listening Position/ DTA Position DTA control You can fine-adjust your listening position. Adjust the sound delay time as nearer speakers Touch [Adjust]. to the selected seat have more delay time, so that the sound from each speaker arrive a Touch [Delay].
Remote control Remote control This unit can be operated using the remote Function control RM-RK258 (optional accessory). Name Changes the aspect ratio. [ASPECT] Functions of the Remote Numeric Specifies the number to search in control Buttons Keypad direct search. For details on the direct search mode, see Direct search mode (P.46).
Connection/Installation Connection/Installation Before Installation to a power source with a constant voltage supply, such as with battery wires, the battery may be drained. Before installation of this unit, please note the following precautions. • If the console has a lid, make sure to install the unit so that the front panel will not hit the lid # WARNINGS when closing and opening.
Connection/Installation Ñ Supplied accessories for Installing the unit installation Ñ Non-Japanese cars (3 m) (2 m) Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. (M5 × 6 mm) (M5 × 8 mm) NOTE •...
Page 49
Connection/Installation Ñ Ñ Microphone unit Removing the unit 1) Check the installation position of the 1) Remove the trim plate by referring to step 1 in “Removing the trim plate”. microphone (accessory 1). 2) Clean the installation surface. 2) Insert the extraction key (accessory 9) deeply into the slot as shown.
Page 50
Connection/Installation Ñ Connecting wires to terminals Light Blue/Yellow (Steering remote control wire) USB device USB terminal (1.0 m) To steering remote 5V = 1.5A To use the steering wheel remote control feature, you need an exclusive remote adapter (not supplied) matched to your car. Subwoofer Preout WOOFER Light Green (Parking sensor wire)
Page 51
Connection/Installation Ñ Connecting an iPhone/Android Android smartphone USB cable iPhone Lightning connector KS-U62 (0.8m) Accessory 7 Accessory 8 Speaker impedance: 4-8 Ω USB terminal (1.0 m) 5V = 1.5A White To front left speaker White/Black Gray To front right speaker Gray/Black Green To rear left...
Troubleshooting Troubleshooting Problems and Solutions Error Messages If any trouble occurs, first check the following When you fail to operate the unit correctly, the table for possible problems. cause of the failure appears as the message on the screen. NOTE [No Device] (USB device) •...
Page 53
Troubleshooting Ñ SiriusXM [Check Tuner] A SiriusXM tuner is not connected to this unit. h Verify that the SiriusXM Connect Vehicle Tuner cable is securely connected to the radio. [Subscription Updated - Press Return To Continue] The SiriusXM subscription has been renewed. h Touching [Return] on the popup screen will clear the message.
Appendix Appendix Playable Media and Files You can play various kinds of media and files on this unit. Ñ About files The following audio and video files are supported. ■ Playable Audio files Format Bit rate Sampling frequency Bit count AAC-LC (.m4a) MPEG2/4 AAC LC 8 –...
Appendix Specifications ■ Bluetooth section Technology ■ Monitor section : Bluetooth Ver. 4.1 Picture Size Frequency : 6.75 inches (diagonal) wide : 2.402 – 2.480 GHz : 151.8 mm (W) × 79.7 mm (H) RF Output Power (E.I.R.P.) 5-15/16 × 3-1/8 inch : +8 dBm (Avg.), Power Class 1 Display System Maximum Communication range...
Page 56
Appendix ■ FM tuner section ■ Audio section Frequency Range (step) Maximum Power Output (Front & Rear) : 87.9 MHz – 107.9 MHz (200 kHz) : 45 W × 4 Usable Sensitivity (S/N: 30 dB) Full Bandwidth Power (at less than 1% THD) : 16.2 dBf (1.8 μV/75 Ω) : 21 W ×...
Appendix About this Unit OR (¡¡) DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED ■ Copyrights FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR •...
Page 58
Appendix ■ FCC CAUTION – Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the Changes or modifications not expressly approved by following disclaimer in the documentation and/or the party responsible for compliance could void the other materials provided with the distribution.
Page 59
■ Informação sobre a eliminação de Products: MONITOR WITH RECEIVER pilhas Model Name: KW-M560BT / KW-M56BT Este produto não deve ser eliminado como lixo Responsible Party: JVCKENWOOD USA doméstico geral. Devolva a pilha usada ao revendedor CORPORATION ou entidade autorizada para que a mesma seja 2201 East Dominguez Street, devolvida ao fabricante ou importador.
Page 60
Important Notice on Software EULA Ñ Ñ Software License on This Product Software License Agreement The software embedded in this product comprises a JVCKENWOOD Corporation (hereinafter called number of independent software components, each “Licensor”) holds either the copyright to the of which is copyrighted by JVCKENWOOD Corporation embedded software or the right to sublicense it.
Page 61
Article 3 (Terms of License) Article 8 (Cancellation of the Agreement) 1. In assigning this product, User may not retain Licensor reserves the right to cancel this agreement the original copy of the embedded Licensed forthwith and claim compensation from User for the Software (including associated literature, updates damages caused by such cancellation when User: and upgrades) and any duplicates and associated...