Panasonic KX-TD500 User Manual page 262

Station Features and Operation (PT/SLT)
To terminate one party and talk to the other
PT
(CO) INTERCOM
or
Press CO or INTERCOM
of the party to remain connected.
To leave the conference
PT
Hang up or press
SP-PHONE/MONITOR .
Conditions
[General]
• Class of Service
Class of Service programming determines the extension that can perform this feature.
• Executive Busy Override Deny
It is possible for extension users to prevent this feature from being executed by another
extension user.
• This feature does not work if "Executive Busy Override Deny" or "Data Line Security" is
set at either one of two extensions or both of them.
• Confirmation tone
When a 2-party call is changed to a 3-party call and vice versa, a confirmation tone is sent
to all three parties. This tone can be eliminated by System Programming <Section 2.8
System Option, "8. Confirmation tone for Override, Barge-in, Conference and Privacy
Release" in the Programming Guide>.
• 3-party call
During a 3-party conference call with an outside party and inside party, you can terminate
either one of two parties and talk to the other.
• Trunk Route Control
When the outside call made using a specific trunk is busy on another call, the Manager or
the Operators can join the existing outside call by dialing "2" after hearing a busy tone.
262
Confirmation tone
(optional)
The other two parties
continue their conversation.
2-party call
User Manual