Panasonic KX-TD500 User Manual page 101

For KX-T7431 and KX-T7433 users
To store a number
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
7431/7433
Dial .
The STORE indicator light turns off.
The display shows the current status.
(If nothing is stored, "Not Stored" is displayed.)
<PT Display Example>
9-123-4567
CLR
Up to 24 digits, consisting of 0 through 9,
or "]" : secret) and CONF (-:hyphen), can be stored.
To store the telephone number of an outside party, the line access code (9 or 801
through 848) must be stored as the leading digit.
To erase the line, press the CLR (S2) button or TRANSFER button.
— CLR (S2) button: for KX-T7433 users
— TRANSFER button: for KX-T7431 users
To store a name, press the NEXT(S3) button (KX-T7433) or MODE button (KX-
T7431) and go to step 4 in "To store a name" as described in the following procedure.
— To exit the Station Programming mode: Press [PROGRAM].
User Manual
station speed dial no.
Enter a station speed dial
number (0 through 9).
(—Outside number, 123-4567,
is now programmed.)
NEXT
desired number
Enter the desired number
(extension number,
phone number, etc.).
The STORE indicator lights.
The display shows the initial
programming mode.
, #, FLASH, PAUSE, INTERCOM, ("["
Station Programming
AUTO DIAL
STORE
Press STORE.
101