Table of Contents
Advertisement
Message
lights up in the
display and a
fault code F with
numbers may ap-
pear. An alarm
will also sound.
Cause and remedy
There is a fault.
Switch the alarm off by touching OK.
Call the Miele Customer Service Department.
To report the fault, you need the fault code and also
the model designation and serial number of your re-
frigeration appliance. You can access this informa-
tion in the display:
Touch OK.
The appliance data required will be shown on the
display.
Touch OK.
To switch off the refrigeration appliance, use the
or sensor control to scroll to the symbol.
To exit the information display, use the or
sensor control to scroll to the symbol.
Touch OK.
There is an appliance fault: this display always has
priority over any settings which have just been selec-
ted.
An appliance fault has priority over any current door
and/or temperature alarms displayed.
Problem solving guide
75
Advertisement
Table of Contents
