Cleaning And Servicing - Bosch MultiTalent 3 Instruction Manual

en

Cleaning and servicing

– With the blade insert with grinding blade
q for grinding and cutting fairly small
quantities of spices (e.g. pepper, cumin,
juniper, cinnamon, dried anise, saffron),
grain (e.g. wheat, millet, linseeds), coffee
and sugar. It is not intended for grinding
very dry, solid foods larger than coffee
beans such as nutmeg, dry ginger ... .
Caution!
Only fill the appliance with roasted coffee or
espresso beans.
W Risk of injury from sharp blades /
rotating drive!
Do not remove/attach the universal cutter
until the drive has stopped.
Do not touch blades of the blade insert with
bare hands.
Fig. F shows guide values for the maximum
quantities and processing times when
working with the universal cutter.
Fig. E
■ Put down universal cutter jug with the
opening face up.
■ Add food, which is to be cut, in the jug.Note
MAX mark on the jug!
■ Place seal on the blade insert. Ensure that
the seal is positioned correctly.
Important information
If the seal is damaged or not correctly
positioned, liquid may run out.
■ Insert blade insert (p/q) into the univer-
sal cutter jug and lock anti-clockwise (m).
Rotate the blade insert at least until the
arrow matches up with the marking on the
universal cutter jug.
■ Turn universal cutter over (blade insert face
down).
■ Attach the universal cutter (arrow on jug on
dot on the appliance .) and rotate all the
way clockwise (,).
■ Insert the mains plug.
■ Set the rotary switch to the desired setting.
Note: The longer the appliance remains
switched on, the finer the ingredients are cut.
Recommendations on using the accessories
can be found in the section "Recipes/
Ingredients/Processing".
14
After using the appliance
■ Set the rotary switch to P.
■ Remove mains plug.
■ Rotate universal cutter anti-clockwise and
remove.
■ Turn universal cutter over (blade insert face
up).
■ Loosen blade insert clockwise (l) and
remove from the universal cutter jug.
■ Empty jug.
■ Clean all parts, see "Cleaning and
servicing".
Cleaning and servicing
The appliance requires no maintenance.
Thorough cleaning protects the appliance
from damage and keeps it functional.
An overview of cleaning the individual parts
can be found in Fig. G.
W Risk of electric shock
Never immerse the base unit in water or
place under running water.
Warning!
Surfaces may be damaged. Do not use
abrasive cleaning agents.
Note: If processing e.g. carrots and red
cabbage, the plastic parts will become dis-
coloured by a red film which can be removed
with a few drops of cooking oil.
Cleaning the base unit
■ Remove mains plug.
■ Wipe the base unit with a damp cloth.
If required, use a little detergent.
■ Then dry the base unit.
Cleaning the bowl and
accessories
W Risk of injury from sharp blades!
Do not touch blades of the universal blade
with bare hands. When not in use, always
store the universal blade in the blade guard.
Clean them with a brush. Do not grip the
sharp blades or edges of the cutting discs.
Grip the discs by the plastic part in the centre
only!
All parts are dishwasher-proof. Do not wedge
plastic parts in the dishwasher as they could
warp.