Bosch MultiTalent 3 Instruction Manual page 10

en Important safety notices
Never immerse the base unit in liquids or place under running water
and do not clean in the dishwasher.
Before rectifying a fault, pull out the mains plug.
W Risk of injury from the rotating tools!
While the appliance is operating, never place fingers in the mixing
bowl. Always use the pusher for adding ingredients.
After switching off, the drive continues running for a short time.
Change tools only when the drive is at a standstill.
W Risk of injury from sharp blades/rotating drive!
Never reach into the attached blender jug!
Do not remove/attach the blender jug until the drive has stopped. Do
not remove/attach the universal cutter jug until the drive has stopped.
W Risk of injury from sharp blades!
Do not touch blades of the universal blade with bare hands. When
not in use, always store the universal blade in the blade guard. Clean
them with a brush.
Do not grip the sharp blades or edges of the cutting discs. Grip the
discs by the plastic part in the centre only!
Do not place fingers in the feed tube. Only use the pusher when
adding more ingredients. Do not touch blades of the blade insert with
bare hands. Clean them with a brush.
W Risk of scalding!
If processing hot liquids, steam escapes through the funnel in the lid.
Add a max. 0,4 litres of hot or frothing liquid.
W Risk of injury!
Never assemble accessories on the base unit.
W Important!
It is essential to clean the appliance thoroughly after each use or after
it has not been used for an extended period. X "Cleaning and servic-
ing" see page 14
Explanation of the symbols on the appliance or accessory
W
Caution! Rotating tools.
Do not place fingers in the feed tube.
o
Lock blade insert in the blender or universal cutter jug.
n
Remove blade insert from the blender or universal cutter jug.
p
Blade insert with blender/cutting blade
q
Blade insert with grinding blade
10