Specifications; Optional Accessories - Panasonic PT-D6000 Specification Sheet

Specifications

Models
Power supply
Power consumption
DLP chip Panel size
™
Display method
Pixels
Lens Powered zoom/focus lenses (1.8– 2.4:1), F 1.7– 2.0, f 26.8 –35.7 mm
Lamp
Screen size
Brightness* 3
Center-to-corner uniformity*
3
Contrast*
3
Resolution
Scanning RGB Horizontal: 15–91 kHz, Vertical: 50– 85 Hz, Dot clock: 162 MHz or lower
frequency YP P (YC C )
B R B R
S-Video/Video
Optical axis shift
Keystone correction range
Installation
Other features Multi-Screen Support System, Geometric Adjustment
Terminals DVI-D IN
RGB 1/YP P IN
B R
RGB 2/YP P IN
B R
VIDEO IN
S-VIDEO IN
SERIAL IN
SERIAL OUT
REMOTE 1 IN
REMOTE 1 OUT
REMOTE 2 IN
LAN
HD-SDI* 4
Power cord length
Cabinet material
Dimensions (W x H x D)
Weight* 5
Operating temperature
Operating humidity
Supplied accessories
*1 During eco stand-by mode operation, network functions such as standby-on from a LAN network and the serial output terminal will not operate. *2 Brightness: 3,000 lumens (PT-DZ6710/DZ6700/DW6300), 3,250 lumens (PT-D6000).
*3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *4 SD-SDI is also supported. *5 Average value. May differ depending on models.

Optional accessories

Lens
Zoom lens ET-DLE150
1.3 – 1.9:1 (PT-DZ6710/DZ6700)
1.4 – 2.0:1 (PT-DW6300)
1.3 – 2.0:1 (PT-D6000)
Zoom lens ET-DLE250
2.3 – 3.6:1 (PT-DZ6710/DZ6700)
2.4 – 3.8:1 (PT-DW6300)
2.4 – 3.7:1 (PT-D6000)
Zoom lens ET-DLE350
3.6 – 5.4:1 (PT-DZ6710/DZ6700)
3.8 – 5.7:1 (PT-DW6300)
3.7 – 5.6:1 (PT-D6000)
Zoom lens ET-DLE450
5.4 – 8.6:1 (PT-DZ6710/DZ6700)
5.6 – 9.0:1 (PT-DW6300)
5.5 – 8.9:1 (PT-D6000)
Fixed focus lens ET-DLE055
0.8:1
PT-DZ6710
North America: 820W or less, Standby mode eco: 0.2W Standby mode normal: 8 W (Both with fan stopped)*
Europe, Asia: 800 W or less, Standby mode eco: 0.3W Standby mode normal: 9 W (Both with fan stopped)*
0.67˝ diagonal (16:10 aspect ratio)
2,304,000 (1,920 x 1,200) x 1, total of 2,304,000 pixels
50– 600 inches (50–200 inches with the ET-DLE055), 16:10 aspect ratio
6,000 lumens (dual lamp, high power mode)
1,920 x 1,200 pixels
525i (480i), 625i (576i), 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 1035/60i, 125 (1080)/60i, 1125 (1080)/50i,
Horizontal: 15.75/15.63 kHz, Vertical: 50/60 Hz, (NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM)
Vertical: +50% (powered), horizontal: ±10% (powered)
RJ-45 for network connection, 10Base-T/100Base-TX, compliant with PJLink™
BNC x 1
Power cord, Wireless/wired remote control unit, Batteries for remote control (x 2), Wire rope
Lamp
Replacement lamp unit
ET-LAD60
ET-LAD60W (twin pack)
Filter
Replacement filter unit
ET-ACF100
Ceiling mount bracket
ET-PKD56H
(for high ceilings)
ET-PKD55S
(for low ceilings)
ET-PKD55S
ET-PKD56H
PT-DZ6700
North America: 120V AC 60Hz Europe, Asia: 220-240V AC, 50/60Hz
0.65˝ diagonal (16:10 aspect ratio)
DLP™ chip x 1, DLP™ system
1,024,000 (1,280 x 800) x 1, total of 1,024,000 pixels
300 W UHM lamps (x 2) (dual lamp system)
90%
2,000:1 (full on/full off, contrast mode: high)*
1080/24p, 1080/25p, 1080/30p, 1080/24sF, 1080/60p, 1080/50p
Vertical: +60% (powered), horizontal: ±10% (powered)
Vertical: ±30°
Ceiling/floor, front/rear
Multi-Screen Support System
DVI-D 24-pin
BNC x 5
D-sub HD 15-pin
BNC
Mini DIN 4-pin
D-sub 9-pin x 1 (RS-232C compliant)
D-sub 9-pin
M3 jack
M3 jack
D-sub 9-pin
3.0 m (9´10˝)
Molded plastic
498 mm x 175 mm x 423 mm
Approx. 16.0 kg (35.3 lbs)
0°–45°C (32°–113°F)
20%–80% (no condensation)
NOTES ON USE
1. Do not install the projector in locations that are subject to excessive water, humidity, steam, or oily smoke. Doing so may result in fire, malfunction, or
electric shock.
2. The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate,
due to impact or extended use.
3. The projector uses of high-wattage lamp that becomes very hot during operation. Please observe the following precautions.
• Never place objects on top of the projector while it is operation.
• Make sure there is an unobstructed space of 500 mm or more around the projector's exhaust openings.
• Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection. When stacking projector units, be sure to
provide the amount of space indicated between them. These space requirements also apply to installation where only one projector unit is operating
atone time and the other unit is used as a backup.
• If the projector is placed in a box or enclosure, temperature of the air surrounding the projector must be between 0 ˚C and 40 ˚C. Also make sure the
projector's intake and exhaust openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the
intake openings.
* Even when the ambient temperature near the intake opening is 40 ˚C/104 ˚F or lower, an accumulation of hot air inside the cabinet may cause the
protective circuit to activate and shut down the projector. Please give ample consideration to the design with regard to ambient temperature
conditions.
4. If the projector is to be operated continuously 24 hours a day, use the dual-lamp optical system's alternating lamp operation (lamp changer) function.
The projector cannot be operated continuously 24 hours a day in dual-lamp mode. Allow a minimum of two hours per day of non-operation time per
day if the using the dual-lamp mode.
5. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
• The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
Please visit our website for more information.
http://panasonic.net/avc/projector
panasonic projector global
PT-DW6300
1
1
0.7˝ diagonal (4:3 aspect ratio)
786,432 (1,024 x 768) x 1, total of 786,432 pixels
Powered zoom/focus lenses (1.8– 2.4:1), F 1.7– 2.0, f 25.6–33.8 mm
50– 600 inches (50–200 inches with the ET-DLE055),
6,500 lumens (dual lamp, high power mode)
2
1,280 x 800 pixels
Horizontal: 15– 91 kHz, Vertical: 50– 85 Hz, Dot clock: 150 MHz or lower
Vertical: +50% (powered), horizontal: ±10% (powered)
—
Please contact Panasonic or your dealer for a demonstration.
JQA-1617
Weights and dimensions shown are approximate. Specifications are subject to change without notice.
An application has been filed for trademark rights, or trademark rights have been granted,
for PJLink in Japan, United States of America and other countries and area.
VGA and XGA are trademarks of International Business Machines Corporation.
All other trademarks are the property of their respective trademark owners. Projection Images simulated.
DLP, DLP logo and DLP Medallion logo are trademarks or registered trademarks of Texas Instruments.
All information included here is valid as of February 2009.
PT-D6000
4:3 aspect ratio
1,024 x 768 pixels
Search
EC98J2010
This product may be subject to export regulations.
(C) 2009 Panasonic Corporation All rights reserved.
PT-D6000series-09February10K Printed in Japan.