Operation - Husqvarna PG 510 Operator's Manual

• Do the inspection and/or maintenance with the motor
stopped and the power plug disconnected.
Introduction
WARNING:
product, you must read and understand the
safety chapter.
Product positions
Operation position
Servicing position
CAUTION:
servicing position on a horizontal surface.
8

Operation

Before you operate the
Only put the product in the
• Do the maintenance to make sure that the product
operates correctly. Refer to
page 14 .
Tilted transport position
Lift transport position
Put a protection between the motor and the electrical
enclosure to prevent damage to the product.
To adjust the handlebar
The handle lock knobs are operated clockwise,
counterclockwise or put in idle position.
Daily maintenance on
1146 - 002 - 09.12.2022