Exiting Setup - Epson ActionPC 5000 User Manual

Exiting SETUP

When you leave SETUP, you can save your settings, or exit
SETUP without saving your settings. You can also return all
values to the factory defaults.
To leave SETUP, press E
SETUP Main Menu, you can perform the following functions:
Load ROM
Default Values
Load Values
CMOS
from
Save Values to
CMOS
Press Esc to leave SETUP and restart your computer.
from any SETUP screen. From the
SC
Loads the factory default settings
stored in ROM back into CMOS.
If you change your system
configuration using the SETUP
program and then have problems,
you can load ROM values to boot
the system and start over.
Loads the current values stored in
CMOS for all SETUP options. This
ignores any changes you have
made through SETUP.
Saves the changes you have made
to your configuration to CMOS.
Running SETUP and Installing Drivers 2-15