5.5
Assembling the drip tray
NOTICE
Risk of material damage!
Drip tray should be installed to prevent water drips or leaks to the ground
that are formed by condensation.
▶ Always install the drip tray before mounting the pipes.
To assemble the drip tray:
▶ Remove the front cover of the indoor unit.
▶ Use the drip tray screws to fix the drip tray to the bottom of the indoor
unit, screw it on slightly. Do not overtighten as it can damage the drip
tray. Observe the following figure for reference:
Fig. 7
Assemble of the drip tray
Compress 3400i AWS – 6721852066 (2023/01)
0010048274-001
Installation
11