Epson AcuLaser CX37DN Series User Manual page 53

TRAY2 PAPER
*1
TRAY3 PAPER
*1
This menu item appears only if an optional 500-Sheet Paper Cassette Unit is installed.
ADMIN. MANAGEMENT Menu
Note:
❏ The ADMIN. MANAGEMENT menu is accessible only by the administrator. To display the settings for
this menu, select ADMIN. MANAGEMENT, use the keypad to type in the 6-digit administrator access
code (default: 000000), and then press the Select key.
❏ Manufacturer's default settings appear in bold.
Epson AcuLaser CX37 Series
Media type
PLAIN PAPER / THICK PAPER / THICK PAPER2 / LABELS /
LETTERHEAD / GLOSSY / GLOSSY2 / SINGLE SIDE ONLY /
SPECIAL PAPER / POSTCARD
Paper size When a setting other than POSTCARD is selected: A4 / A5 / B5 /
LETTER / G LETTER / STATEMENT / EXECUTIVE / CUSTOM
When POSTCARD is selected: J-POSTCARD 100x148 /
D-POSTCARD 148x200 / CUSTOM
Select the type and size of the media loaded into Tray 2. If CUSTOM is selected as the
paper size, specify settings for LENGTH and WIDTH separately.
The Setting range for LENGTH is 148 to 297 mm.
The default setting is 297 mm.
The Setting range for WIDTH is 92 to 216 mm.
The default setting is 210 mm.
Note:
The setting for CUSTOM is displayed in metric (mm) even if ADMIN. MANAGEMENT/USER
SETTING/PRESET ZOOM is set to INCH.
Media type PLAIN PAPER / SINGLE SIDE ONLY / SPECIAL PAPER
Select the type of the media loaded into Tray 3.
Printer/Copier/Scanner User's Guide
Control Panel and Configuration Menu 53