Checks And Prefarations Prior To Operation; Wearing The Safety Protective Gear - Panasonic YD-500KR Operating Instructions Manual

CHECKS AND PREFARATIONS PRIOR TO OPERATION

Wearing the Safety Protective Gear


Safety Protective Gear
 Wear leather gloves and safety shoes, and protect the eyes and exposed parts of your
body.
 Prepare a protective welding mask with light-shielding filter plate.
 Take an appropriate measure for ventilation in order not to inhale toxic gases (Carbon
monoxide. Ozone. Nitrogen oxide, etc.) or metallic fume.
Confirmation of Complete Connection

Make sure again that the entire equipment is connected as shown in OVERALL CONNECTION
DIAGRAM (refer to Page 8).
In case of gas shielded arc welding (CO
degree of the light-shielding filter plate to be used, according to the upper limit value of
the service welding current.
welding or MAG welding), alter the light-shielding
2
17