Additional Key Operations On Dl Option - GE AutoSigma 3000 DL Technical Reference, Operating Manual

Basic functions

Additional key operations on DL option

H
Note:
If these keys are pressed on the older Basic Model
without the DL option the screen will indicate Data
Logger is not fi tted.
MEM This button selects the Memory Menu
(Files must have been allocated, and the
fi le selection be on a particular fi le not
ALL FILES).
FILE This button selects the FILE menu (With
ALL FILES cleared it will access the num-
ber of fi les set up).
C Depending on which menu is currently
selected, a long press of this button will
clear a single FILE, all FILES or a single
MEMORY location.
4 - 4
When the instrument is in the correct mode, a press
on this button will log the current valid reading into the
active memory location within the active fi le. The ac-
tive location is automatically incremented, but if the
location is full then an error message is displayed indi-
cating that the location or fi le is FULL. It is also used to
enter the probe code into the internal memory.
H Note:
For correct button sequences see chapter 5 "Opera-
tion".
Issue 04, 06/2007
Keypad
AutoSigma 3000