Lists; Notes; Button Operation (Keypad) - GE AutoSigma 3000 DL Technical Reference, Operating Manual

How to use this manual
This action table indicates in step form:
– Switch on with a press of ON/OFF button.
– Press the MENU button.
– Press INCREMENT/DECREMENT button repeat-
edly until the required parameter is accessed.
– Press the SET button to move to the value setting
fi eld.
The INCREMENT or DECREMENT buttons are then
used to set the required value.
– Press the MENU button to return the instrument to
its Measurement Mode ready to take readings.
Display fi gures in this manual may show XXXX, YYYY
or ZZZZ as numerical values etc. these indicate that
any valid number or menu item may be displayed.
AutoSigma 3000

Lists

Lists are arranged as follows with bulleted indents.
• 101.6 % IACS. Highest reading
• 101.2 % IACS. Mean reading
• 99.8 % IACS. Lowest reading

Notes

H
Note:
Under this heading you will fi nd special recommenda-
tions concerning measurement techniques, or refer-
ences to important information in other chapters of the
manual.

Button Operation (Keypad)

• Press: Button contact then immediate release.
• Long Press: Button contact for a period of three
seconds or more then release.
Issue 04, 06/2007
Introduction
1 - 5