Frequently Used Procedures
Connecting and Disconnecting the Battery
CAUTION
Before installing, removing, or servicing components, separate the battery disconnect. This
will prevent unexpected operation of system components.
1.
Disconnecting the battery.
A.
Park the machine on a level surface.
B.
Apply the parking brake, shut off the engine, and wait for all machine movement to stop.
C.
Unplug the T-handle connector.
2.
Connecting the battery.
A.
Remove the key from the key switch.
B.
Plug in the T-handle connector.
1. Electric cover
2. Battery interconnect (with T-handle)
3. Battery interconnect (mounted)
Reading Fault Codes
You can read fault codes 2 different ways: on the InfoCenter or on a PC using
7). This section focuses on the InfoCenter display.
The InfoCenter display shows information about your machine, such as fault codes, the charge level of the
battery, and various diagnostic messages and icons that provide information about the machine and the battery.
Figure 5
g364232
1. Electric cover
2. Battery interconnect (with T-handle)
3. Battery interconnect (mounted)
14
Figure 6
Toro DIAG Software (page
g364233