Sony PlayStation VR2 Instruction Manual page 7

High temperature message
If the VR system's internal temperature becomes elevated, a message will
be displayed. In this case, turn off the VR headset and leave it unused for a
while. Make sure that you are not using it in a hot area or with the vents
blocked. If you continue using it in these conditions, the VR headset will not
function properly. After the VR headset cools down, move it to a location
with good ventilation, and then resume use.
VR headset screen
• Keep the VR headset's attachment sensor free from any obstacles. If the
attachment sensor is blocked, the screen will not turn off automatically
even if you remove the VR headset. If an image appears on the screen for
an extended period of time, it might cause a screen burn and a faint
image might remain permanently on the screen.
• Black (dark) pixels and continuously lit pixels may appear in certain
locations on the screen. The appearance of such spots is a normal
occurrence associated with screens and is not a sign of a system
malfunction. Screens are made using highly precise technology. However,
a very small number of dark pixels or continuously lit pixels may exist
and colour irregularities or brightness irregularities may be visible
on each screen.
Liquid, dust, smoke, steam, and heat
• Always ensure the product and its connectors are free of liquid, excess
dust and small particles.
• Do not leave the product in the following areas during use, storage, or
transportation.
– Areas exposed to smoke or steam
– Areas with high humidity, dust, or cigarette smoke
– Areas near heating appliances, areas exposed to direct sunlight, or areas
that retain heat
Set up and handling
• Do not use the cables if they are damaged or modified.
• Do not place heavy items on the product or cables, throw or drop the
product, or otherwise expose it to strong physical impact.
• Do not place the product on surfaces that are unstable, tilted, or subject to
vibration.
• Do not leave the product on the floor.
• Do not walk on the cables or pinch them, particularly near to the
connectors.
• Do not pull or bend the cables with excessive force.
• Do not touch the connectors or insert any foreign objects into them or the
product.
• Unplug the cables if you want to clean or move the product or do not
intend to use it for an extended period of time.
• Do not swing the VR headset around by the cable.
• Do not unplug the VR headset cable until the power indicator is red or
turned off. Unplugging the cable while the lights are white and the VR
headset is turned on, may cause a malfunction.
• Do not expose the product, battery, or accessories to high temperatures,
high humidity, or direct sunlight during operation, transportation, and
storage.
Health and Safety
EN
7