Use The Ps Vr2 Sense Controller - Sony PlayStation VR2 Instruction Manual

Use the PS VR2 Sense controller

1
Press the (PS) button on each of the controllers to turn them on�
The status indicator on each of the controllers turns white.
If the status indicator doesn't turn on, charge the controller.
2
Check that you are correctly holding the left and right controllers, and
wear the straps securely on your wrists�
You can identify the right (R) and left (L) controllers by looking at the
strap holders.
Pass your hand through the loop, and pull the strap while rotating your
wrist to secure the strap.
10
3
Hold the controllers�
(PS) button
Status indicator
Remove the USB cable when you play.
Pair each of the controllers
If it's your first time using the controller, you'll need to pair it with your PS5
console. Turn on your PS5 console, and then in turn connect each of the
controllers to your console using the USB cable.
Charge each of the controllers
Connect each of the controllers to your PS5 console using the USB cable
while the console is on or in rest mode. During rest mode, the status
indicator on each controller slowly blinks white, and then turns off when
each controller is fully charged.
To charge your controller while your console is in rest mode, start at your PS5
console's home screen, and then go to Settings
> Features Available in Rest Mode > Supply Power to USB Ports, and select
an option other than Off.
> System > Power Saving