Gmm Request Ta Model Identification; Gmr Request Ta Revision Identification; Gsn Request Ta Serial Number Identification; Icf Dte-Dce Character Framing - Nokia 6090 Command Manual

+GMM Request TA Model Identification

+GMR Request TA Revision Identification

+GSN Request TA Serial Number Identification

+ICF DTE-DCE Character Framing

Nokia 6090 AT Command Set
This command displays the TA model identification. TA and ME are in the same
physical entity, the response of the command +CGMM is identical. (V.25ter)
Syntax:
AT+GMM
This command displays the TA revision identification. Response is Nokia 6090 SW
version, HW version is not supported. TA and ME are in the same physical entity, the
response of the command +CGMR is identical. (V.25ter)
Syntax:
AT+GMR
This command displays the TA serial number. TA and ME are in the same physical
entity, the response of the command +CGSN is identical (i.e. the IMEI number).
(V.25ter)
Syntax:
AT+GSN
This command is used to determine the character framing that the Nokia 6090 uses
while accepting commands and while transmitting information text and a result code
to/from a DTE. Note that reset commands Z and &F do not change this setting.
(V.25ter)
Syntax:
AT+ICF=[<format>[, <parity>]]
AT+ICF?
AT+ICF=?
Parameters:
<format>
3
5
6
<parity>
0
1
2
3
Display model identification.
Response is Nokia 6090 - GSM900 Fixed
Mobile Phone
Display revision identification.
Display serial number.
Recommended default is 3,3.
Query current setting.
Response is +ICF: <format>,<parity>.
Show valid range of parameters.
Response is +ICF:(list of supported
<format>'s), (list of supported <parity>'s).
8 data, no parity, 1 stop
7 data, parity, 1 stop
7 data, no parity, 1 stop
odd
even
mark
space
55