Brother MFC-J2320 Service Manual page 336

• Selector 7: Extension of the lower range of printable temperatures
Change the lowest printable temperature from 5 to 0 degree-C.
While switching from "Enable" to "Disable" takes effect without powering off and on
the machine, switching from "Disable" to "Enable" requires powering off and on to
take effect.
Selector
No.
Improvement of displaced ruled
1
lines for A3/ledger/B4 size
Improvement of displaced ruled
2
lines for A4/letter size
Improvement of displaced ruled
3 lines for sizes other than A3/
ledger/B4/A4/letter size
4 Brother Paper mode
Improvement of mist stains on
5
the second side
6 Ignore the sensor for paper tray 2 0: Disable (default) 1: Enable
Disable display of MP tray setting
7
request screen
Disable display of wrong setting
8
screen before printing
• Selector 1: Improvement of displaced ruled lines for A3/ledger/B4 size
Setting this selector to "1" switches to the unidirectional print mode with control
enabled for improving displaced ruled lines, in normal printing of A3/ledger/B4 size
plain paper.
• Selector 2: Improvement of displaced ruled lines for A4/letter size
Setting this selector to "1" switches to the unidirectional print mode with control
enabled for improving displaced ruled lines, in normal printing of A4/letter size
plain paper.
• Selector 3: Improvement of displaced ruled lines for sizes other than A3/ledger/B4/A4/letter size
Setting this selector to "1" switches to the unidirectional print mode with control
enabled for improving displaced ruled lines, in normal printing of plain paper of
sizes other than A3/ledger/B4/A4/letter size.
AMS07
(Printing assurance 5)
Function
5-76
Setting and Specifications
0: Disable (default) 1: Enable
0: Disable (default) 1: Enable
0: Disable (default) 1: Enable
0: Disable (default) 1: Enable
0: Enable (default) 1: Disable
0: Disable (default) 1: Enable
0: Disable (default) 1: Enable
Confidential