Static Routes Parameters - Nokia FastMile 3.2 User Manual

WebUI hierarchy screens
The Network/Ethernet WAN screen appears.
Figure 39
You can configure the following WAN access modes:
You can configure the following Ethernet WAN settings:

Static routes parameters

From the network menu, select Static Routes.
The Network/Static Routes screen appears.
56
Network: Ethernet WAN
• cellular
• cellular preferred
• Ethernet preferred
• supported service(s)
• connection type
• PPPoE user name
• PPPoE IP mode: IPv4 or IPv6, or IPv4 and IPv6
• IPv6 address
• VLAN
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
User Guide
3TG-02292-AAAA-TCZZA-02