About The Modes; Lte Only; Lte-5G En-Dc - Nokia FastMile 3.2 User Manual

5g gateway
Hide thumbs Also See for FastMile 3.2:
Table of Contents

Advertisement

User Guide

About the modes

LTE only

When operating in the LTE-only mode, the FastMile 5G Gateway 3.2 will only use the
4G/LTE network to connect to the service provider's network.

LTE-5G EN-DC

When operating in the LTE-5G EN-DC mode, the FastMile 5G Gateway 3.2 uses a
4G/LTE carrier and 5G NSA carrier at the same time to connect to the service
provider's network.
5G SA
When operating in the 5G SA mode, the FastMile 5G Gateway 3.2 uses the 5G
network to connect to the service provider's network.
3TG-02292-AAAA-TCZZA-02
• PIN-locked SIM cards: a SIM PIN number is required to unblock the SIM card
service
• one logical temperature sensor
• supports WebUI configuration to enable or disable single SSID: if enabled the
CPE will merge 2.4 GHz band SSID and 5 GHz band SSID, and automatically
select the frequency band that provides a faster speed
• can operate in the following modes:
- LTE-only
- LTE-5G EN-DC
- 5G SA
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
Introduction
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents