Table of Contents
Advertisement
PRODUCT SAFETY
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions
should always be followed. Please refer to the basic Important
Safeguards as outlined in the Owner's Manual included with
your Stand Mixer.
SAVE THESE INSTRUCTIONS
For complete details on product information, instructions and videos, including Guarantee
information, visit www.KitchenAid.co.uk or www.KitchenAid.eu. This may save you the cost
of a service call. To receive a free printed copy of the information online,
PRODUCT ASSEMBLY
Before First Use
Your Stand Mixer is individually adjusted at the factory for optimal performance. When using
the Ceramic Bowl, it may be necessary to readjust the beater-to-bowl clearance. Ensure the
thread ring is tight enough to avoid beater-to-bowl hits. Please refer to the Stand Mixer
Owner's manual for complete information on adjusting the beater-to-bowl clearance.
IMPORTANT: Before use, wash with hot, soapy water; rinse and dry thoroughly.
NOTE: This Ceramic Bowl is designed to fit all 5K45 - 5KSM45 - 5KSM125 - 200 Series
models. Follow these instructions to attach the Ceramic Bowl to your Stand Mixer.
1.
Be sure the speed control is set to OFF/ 0 and the Stand Mixer is unplugged.
2.
Unlock and lift the Motor Head. Then, lock
3.
Place the Ceramic Bowl on the Clamping Plate, and attach by turning gently in a clockwise
direction.
4.
Use the directions in the Stand Mixer manual to attach accessory.
PRODUCT DISASSEMBLY
1.
Turn the Stand Mixer to OFF/ 0 and unplug.
2.
Raise the Motor Head: Unlock and lift the Motor Head. Then, lock
lifted.
3.
Remove the accessory: Press the accessory upward, turn it and pull it away from the
Beater Shaft.
4.
Remove the Ceramic Bowl: Twist to unlock the bowl from the Clamping Plate.
*Locking option is available on select models.
2
call 00 800 381 040 26.
the head to keep it lifted.
*
the head to keep it
*
Advertisement
Table of Contents
