J4 (10/100/1000Baset Ethernet Channel 1); J5 (Usb) - GE CPCI3UX606 Hardware Reference Manual

Publication No. CPCI3UX606-HRM/1

1.4.11 J4 (10/100/1000BaseT Ethernet Channel 1)

Gigabit operation depends on availability of the required signals, which is an
IMP3A build option (see also P1, P9 and P10). 10/100 signals are given in
parentheses.
Table 1-16 J4 Pin Assignments
Pin Signal
1 ETH1_0+ (TX+)
2 ETH1_0- (TX-)
3 ETH1_1+ (RX+)
4 ETH1_2+
5 ETH1_2-
6 ETH1_1- (RX-)
7 ETH1_3+
8 ETH1_3-

1.4.12 J5 (USB)

NOTE
Availability of signals at this connector depends on the build option selected on the IMP3A.
Table 1-17 J5 Pin Assignments
Pin Signal
1 USB_PWR
2 USB_D-
3 USB_D+
4 GND
The IMP3A provides USB_PWR when a USB build option is selected.
CPCI3UX606 13