Zigzag Stitch - Silvercrest SCNM 100 A1 Operating And Safety Instructions Manual

Zigzag stitch

05 06 07
1
2
1
2
Use the all-purpose presser foot (a).
Set the pattern as shown in figure.
Adjust the stitch width.
1. Move the cursor under the stitch width digits with the left or
right button.
2. For a narrower stitch, press the down button. For a wider
stitch, press the up button.
Adjust the stitch length
1. Move the cursor under the stitch length digits with the left or
right button.
2. For a shorter stitch length, press the down arrow button. For
a longer stitch length, press the up arrow button.
NOTE
Clean zigzag stitches are usually achieved with a stitch length
value of "2.5" or less. Zigzag stitches with a short length are
called satin stitch.
Sewing basics
EN 33