Motorola DCT2000 Installation Manual page 14

R e a r P a n e l
Figure 2-2 illustrates the rear panel of the DCT 2000 which contains a switched power outlet;
connectors for video, audio, and RF cabling; data output connectors; and IR Blaster output
connector:
1
3
2
7
A protective plate covers the rear panel opening when the optional Telco return is not installed.
Do not remove the protective plate unless you are installing new hardware in the opening.
Table 2-2 describes each of the rear-panel features:
1
2
3
TO R F IN
4
5
6
7
CAB LE IN
4
5
9 10
8
F-type connector used to connect the DCT 2000 to a standard TV or VCR
F-type connector used for DCT 2000 input from the
F-type connector used to connect the
integrated RF return)
Covers slot used for STARFONE option
RCA jacks for looping through audio from auxiliary audio equipment
Options that enhance your DCT 2000; see, "Options" for more information
F-type connector used for the coaxial cable input port from plant (input to integrated
RF return)
O v e r v i e w
6
DATA
11
12
connector
TO RF IN
port to the port (output from
TO RF IN RF IN
13