Status And Error Display Of Sinamics Integrated - Siemens SIMATIC S7-1500 Equipment Manual

Interrupts, diagnostics alarms, error messages and system alarms
5.1 Status and error displays
RUN/STOP LED
LED lit yellow
LED lit yellow
LED flashes yellow
yellow/green
yellow/green
LED lit yellow
5.1.3

Status and error display of SINAMICS Integrated

RDY LED states
Table 5-2 SINAMICS Integrated RDY LED
60
ERROR LED
LED flashes red
LED flashes red
LED off
LED off
LED flashes
LED flashes red
LED flashes
LED lit yellow
RDY LED Meaning
Electronics power supply is missing or is outside the permissible tolerance range
LED off
The component is ready for operation.
LED lit green
Cyclic DRIVE-CLiQ communication is active or SINAMICS Integrated is waiting for
first commissioning.
MAINT LED
The program on the SIMATIC Memory Card
is causing an error.
LED flashes yellow
Error state of the CPU
Additional information is available via the
CPU diagnostic buffer.
Error during firmware update
Update of an incompatible SINAMICS
Integrated firmware was refused
A diagnostics event is pending.
LED off
Service data backup in STOP ended with
error.
CPU is performing internal activities during
LED off
STOP, for example, ramp-up after STOP,
firmware update.
CPU stores service data
Download of the user program from the
SIMATIC Memory Card
CPU runs a program with active break­
point. The program is presently moving
from one breakpoint to the next.
Startup (transition from STOP → RUN)
LED off
Startup (CPU booting)
LED flashes yellow
Test of LEDs during startup, inserting a
module.
LED flashing test
Lamp test at POWER ON
LED lit yellow
Note: All six LEDs and the ACT-LED on the
card slot are lit yellow.
Equipment Manual, 11/2022, A5E46600370-AC
Meaning
SIMATIC Drive Controller