Table of Contents
Advertisement
Configuration menu Icons.
Frost Protection (8
Once Frost protection is enabled, the return air
will be constantly monitored, and the following
strategy is implemented.
To change to a different indoor unit within a "Group",
tap the air conditioner icon, the following screen will appear.
Available units will be highlighted, tap the respective unit to
edit its "DN" codes
Cool Designs Ltd makes every effort to ensure that the information provided within this publication is correct and error free, however we cannot guarantee that it is free of inaccuracies, errors, or
omissions. Users should seek to clarify this information for themselves prior to basing any decisions upon such information.
1. General Remote Controller setup.
Enable or disable Header Unit
(Master, Slave remote)
Show setpoint 0 or 1 decimal place
Activate "Frost" Protection"
Input Service Information,
(Requires PC)
o
C).
1. Continued.
Frost protection, it is recommended
that the temperature sensor in the
controller is selected as the "Room
Temperature – Return Air)
2. User interface setup.
Enable or disable functions.
Operating mode, temperature
change, fan speed, louvre.
3. DN Code Setting.
To change DN code or Data, use
the respective UP/DOWN buttons.
To enable changes, press the
"GREEN" button (9), to EXIT press
the "Back Button (10)
A list of useful DN codes is available at the end of this document.
Advertisement
Table of Contents
