Table of Contents
Advertisement
Home >
Cut Print/Cut Copy
Copy an ID Card on A4 Paper and Cut the Paper in Half
Use the Cut Copy feature to perform [2in1(ID)] copying. With the Cut Copy feature, your machine
automatically creates a layout for both sides of an ID card to be arranged on the top half of A4 paper when you
copy them, and then cuts the paper in half.
•
You can use only A4 size paper.
•
You may copy an identification card to the extent permitted under applicable laws. For more detailed
information, see the Product Safety Guide.
1. Place your identification card face down near the upper-left corner of the scanner glass.
a
a
a. 3 mm or greater (top, left)
b. 145 mm
c. 102 mm
d. Scannable area
2. Press
[Cut Copy].
3. Enter the number of copies in one of the following ways:
•
Press [-] or [+] on the touchscreen.
•
Press
to display the keyboard on the touchscreen, and then enter the number of copies using the
touchscreen keyboard. Press [OK].
4. Press [ID].
5. To change the copy settings, press
[OK].
6. Press [Mono Start] or [Colour Start].
The machine starts scanning one side of the identification card.
7. After the machine has scanned the first side, turn over the identification card and press [Continue] to scan
the other side.
> Copy an ID Card on A4 Paper and Cut the Paper in Half
d
c
b
[Options]. When you have finished changing the settings, press
139
Advertisement
Table of Contents
