Husqvarna AUTOMOWER 450X Operator's Manual page 30

Message
Map problem
Wheel drive problem, right/
left
Searching for position
No accurate position from
satellites
30 - Troubleshooting
Cause
There is no specified work area.
The charging station or the reference sta-
tion was moved.
The map object file is incorrect.
The wheel is blocked by grass or other
objects.
Weak satellite signal to the reference sta-
tion.
Weak satellite signal to the product.
Weak satellite signal to the reference sta-
tion.
Weak satellite signal to the product.
Action
Make a work area in the Automower
To make a work
Connect app. Refer to
area on page 17 .
Move the charging station or the refer-
ence station to their initial positions.
Do a new installation of the map.
Do a check of the map in the app. Adjust
the map and save it.
Delete the map and do a new installation.
Examine the drive wheel and remove
grass or other objects.
The satellite signal is temporary weak.
The product will start to operate when the
satellite signals are good.
Examine the installation of the reference
station. Refer to the Operator's manual
for the Reference station.
The satellite signal is temporary weak.
The product will start to operate when the
satellite signal are good.
Examine if there is an object between
the product and the sky that cause inter-
ference with the satellite signal. Remove
the object or do a new installation to not
include these parts in the work area. Re-
Installation of the map objects on
fer to
page 15
Examine the installation of the reference
station. Refer to the Operator's manual
for the Reference station.
Examine if there is an object between
the product and the sky that cause inter-
ference with the satellite signal. Remove
the object or do a new installation to not
include these parts in the work area. Re-
To make a work area on page 17
fer to
1970 - 001 - 10.10.2022
®