Pnp/Pci Configuration Setup - Acer 370LXA User Manual

3.5.12 Resume by Ring
This option lets you specify enable or disable external Modem Wake Up function. The function of power on through modem
when system is off.
To select "Enabled" : To let the system to enter the environment of DOS or Windows 95/98 OS before system is power off. As
long as there are any massage through the Modem to enter the System during system is power off. The system will enable
power on function.
3.5.13 Resume by Alarm
Set this option to enable or disable the RTC Alarm to Wake Up the system which is set at soft Off.
3.5.14 Wake up on LAN
This allows you to remotely power up your system through your network by sending a wake-up frame or signal. With this
feature, you can remotely upload/download data to/from systems during off-peak hours. Set to Enabled to set this
feature.
3.5.15 Date (of Month) Alarm, Time (hh:mm:ss) Alarm
Set these options to specify the RTC Alarm time on Date / Hour / Minute / Second.
3.5.16 IRQ 8 Break Suspend
To enable or disable the detection of IRQ 8 (RTC) event for power down state transition.
3.5.17 IRQ[3-7, 9-15], NMI
To enable or disable the detection of IRQ 3-7, IRQ 9-15 or NMI interrupt events for power down state transition.
3.5.18 Primary/Secondary IDE 0/1, Floppy Disk, Serial & Parallel Port
These items enable or disable the detection of IDE, floppy, serial and parallel port activities for power down state transition.
Actually it detects the read/write to/from I/O port.
3.6.1 PNP OS Installed
This field allows you to use a Plug-and-Play (PnP) operating system. Please set it as " No"" if the operating system has no PnP
function or to avoid reassigning the IRQs by the operating system.
3.6.2 Resources Controlled By
Default setting is "Auto". This setting allows the BIOS to self detect setting and Plug-and-Play devices during start up. The user
can select and configure IRQs under "Manual" mode.
3.6.3 Reset Configuration Data
In case a conflict occurs after you assign the IRQs or after you configure your system, you can enable this function to allow your
system to automatically reset your configuration and reassign the IRQs, DMAs, and I/O address.

3.6 PNP/PCI Configuration Setup

ROM PCI / ISA BIOS (XXXXXXXX)
PNP/PCI CONFIGURATION
AWARD SOFTWARE, INC.