Advertisement
TM
3.1 Product Feature
3.1.2 Function Description
Category
Level1
Temp setting
Operation mode
Display indoor temperature
Basic function
Fan Speed
Wind direction
Air Purify
Dust lamp always display
(Smart indicator)
Setting for brightness of
IDU display
Auto drying (Auto clean)
Energy saving cooling
Robot cleaning
Sub function /
(Smart clean)
Function setting
Electric Heater
Comfort cooling
Setting /checking address
of central controller
Setting the change tem-
perature for auto
changeover
Celsius/Fahrenheit
Switching
2 _
Wireless remote controller
HVAC Solution
Level2
-
Cooling
Heating
Dehumidification
Fan
AI or Auto changeover
Auto Changeover for H/P
Power cooling
Power heating
-
Slow
Low
Medium
High
Chaos
Up/Down swing
Left/Right swing
Up/Down airflow direction
Left/Right airflow direction
Direct wind
Indirect wind
Smart mode
Refresh mode
-
-
-
-
-
-
-
-
-
-
-
Level3
-
Cool the room to the desired temperature.
-
- Setting range : 18~30 ℃
Heats the room the desired temperature.
-
- Setting range : 16~30 ℃
-
It removes the moisture with cooling.
-
Fan only operation, no cooling or heating.
The product automatically provides the appropriate fan speed based on the
AI for C/O
temperature of the room
-
It provides strong cooling in short time.
-
It increases indoor temperature quickly.
-
It display indoor temperature.
It is a function to set the Fan speed of the indoor unit.
* For chaos, fan speed is displayed repeatedly
-
[Low → Medium → High → Low...].
-
-
-
-
-
The vane moves up and down repeatedly.
-
The vane moves left and right repeatedly.
-
You can set the upper and lower angle of the vane to the desired position.
-
You can set the left and right angle of the vane to the desired position.
-
It operate at the maximum angle. It is suitable for high ceiling.
It operate at the minimum angle. Provides air flow that blows away from user
-
for comfort.
-
Smartly keeps set temperature by adjusting the wind direction automatically.
Adjust the temperature of the direct and indirect wind to create a comfortable and
-
efficiency working environment.
It makes the indoor air clean and pleasant.
-
Air purify alone operation can be used only for dust sensor applied products.
It is a function to set to always display the status of fine dust on the display of
-
products equipped with a dust sensor.
-
It is a function to control the brightness of the LED of the product's display.
When the product is off after cooling operation, it is the function to dry the
-
inside of the indoor unit to remove mold and moisture.
This is a function that improves the user's comfort and power saving performance
-
by raising the desired temperature after an appropriate time elapses after the
indoor temperature reaches the desired temperature during cooling operation.
Robot cleaning function is the function to automatically perform the filter clean-
-
ing with the cleaner in the product when the air conditioner is used for certain
period of time.
It is the function to reinforce the heating capability by turning on the electric
-
heater during the heating operation.
The comfort cooling is the function to automatically control the cooling strength
-
to maintain the pleasant feeling without turning off the product after the indoor
temperature reached the desired temperature.
When multiple indoor units are controlled by the central controller, you can set
-
and confirm a number to distinguish each indoor unit.
This function sets the range of the cooling / heating switching temperature of
-
Auto Changeover mode.
-
This function sets the temperature unit displayed on the remote controller.
DESCRIPTION
-
-
-
-
Advertisement
