34
Connecting Your TV
Connecting a digital audio system
Press the ( /
4
Format.
5
Press the ( /
PCM, depending on your device, see
page
(Sample Image) Audio Setup screen - Done
6
To save the new settings, highlight Done, and then press the
ENTER button.
To revert to the factory defaults, highlight Reset, and then
press the ENTER button.
NOTE
arrow) buttons to select Digital Output
arrow) buttons to select either Dolby Digital or
86.
Some audio systems may not be compatible with Dolby Digital
O
bitstream signals. Older audio systems that are not compatible
with standard optical out signals may not work properly, creating
a high noise level that may damage speakers or headphones.
THIS DAMAGE IS NOT COVERED BY YOUR WARRANTY.
The DIGITAL AUDIO OUT terminal may not output some digital
O
audio sources because of copy restrictions.
"Audyssey ABX™" on