Connecting An Hdmi® Or Dvi Device To The Hdmi® Input - Toshiba 19L4200UOM User Manual

28
Connecting Your TV
Connecting an HDMI® or DVI device to the HDMI® input
Connecting an HDMI
The HDMI
uncompressed digital video from an HDMI
uncompressed digital video from a DVI (Digital Visual Interface)
source device.
This input is designed to accept HDCP (High- Bandwidth
Digital-Content Protection) program material in digital form from
EIA/CEA-861-D– compliant
as a set-top box or DVD player with HDMI
The HDMI
WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i
(60Hz), and 1080p (24Hz/60Hz) signal formats. For detailed signal
specifications, see
Supported Audio format: Linear PCM, sampling rate 32/44.1/48
kHz.
NOTE
To connect an HDMI
(type A connector) per HDMI
For proper operation, it is recommended that you use an
O
HDMI
HDMI
O
audio cables are not required (see illustration). See
HDMI® audio mode" on page 55
TV back panel
Playback device
(Sample Illustration) L4200U Series—HDMI
® or DVI device to the HDMI
®
input on your TV receives digital audio and
®
input can accept and display VGA, SVGA, XGA,
"HDMI® signal formats" on page
To connect a computer to the HDMI
TV's HDMI® terminal" on page
®
device, you will need one HDMI
®
cable with the HDMI
®
cables transfer both video and audio. Separate analog
®
source device, or
[1]
consumer electronic devices (such
®
®
input, see
37.
®
device.
®
Logo (
® input
or DVI output).
130.
"Connection to the
®
cable
).
"Setting the
®
connections