Table of Contents
Advertisement
3
Close the chamber lid.
1
3
1
2
4
Based on the "Flour/water proportion
table" to measure the required amount of
water. (Figure 4-5)
4
Note
•
There are 2 sets of water markings on the supplied
water cup. One set is for plain noodle making, and the
other set is for egg noodle and other flavors noodle
making..
5
Connect to the power. The noodle
maker will sound once (Figure 6), and
all indicators will flash once. The noodle
maker is in standby mode.
» Automatic indicator ( ) and the start/
(
pause indicator
The serving indicators (
flash in cycle. (Figure 7-9)
2
5
)
will light up.
) will
/
6
BEEP
8
Caution
•
By default, the program is set as automatic program. If
this is not the case, press the programs button (
to reselect.
6
Based on the amount of flour, press the
servings button (
) to select
for the respective servings. (Figure 10)
7
Press start/pause button (
processing. (Figure 11)
8
During processing, slowly pour in the water
or other ingredients, which you measure
with the supplied water cup, along the entire
length of the opening in the lid. (Figure 12)
7
)
or
) to start
11
EN
9
Advertisement
Chapters
Table of Contents
