HP 16532A Service Manual page 64

HP 16532A - Service
Figure 6-5 shows the selection menu for choosing to perform functional tests. The status of the functional
tests is given.
Figure 6-5. Functional Tests Screen
6. Touch the Functional Tests field.
Figure 6-6 is the main self-test menu. Self-tests can be either run individually by touching a specific test
field, or run automatically through all tests one time by touching the All Tests field. When either All Tests
or individual tests are run, the status will change to either PASSED or FAILED. If you do all tests by touch-
ing the All Tests field, skip to step 11. The procedures given in steps 7 through 12 use the A/D Test as an
example of how individual tests are done.
Figure 6-6. Main Test Menu
6-6