Advertisement
7. OS/2 Driver Installation
7.2. Installing in an Existing OS/2 2.x/3.0
If you are adding an ASUS PCI-DA2000 Series controller to a computer that al-
ready has an ASUS PCI-DA2000 Series controller installed for OS/2 2.x/3.0, then
follow step 1 through step 2 only. If you are adding an ASUS PCI-DA2000 Series
controller to a computer that has no ASUS PCI-DA2000 Series controller installed
for OS/2 2.x/3.0, then follow all steps.
1 Use ASUS PCI-DA2000 Series BIOS Configuration Utility to disable ISA Mail-
box Emulation mode (default is disabled). To do this, at system bootup, press
[Ctrl-I], select Configure Card option, then change IO Port Address to DIS-
ABLED.
2 Use ASUS Text RAID Manager or RS-232 Terminal Interface Operation to con-
figure Logical Drives and SCSI Devices and map them to valid SCSI-IDs/LUNs.
Note that SCSI ID 7 is reserved for the ASUS PCI-DA2000 Series controller
and thus no logical drives or devices should be mapped to this SCSI ID.
3 Execute the program DDINSTAL by selecting the Device Driver Install icon
within the System Setup folder of OS/2 System folder or by typing DDINSTAL
at OS/2 prompt.
4 Insert the ASUS PCI-DA2000 Series Distribution Diskette in the appropriate
floppy drive and follow the instructions from DDINSTALL. Set the source
directory to a:\os2 and the destination path to the root directory of system drive
while running DDINSTALL.
5 Reboot your system.
7.3. Updating ASUS PCI-DA2000 Series OS/2
Device Driver
1 Copy the new device driver from the distribution diskette to the root directory of
system drive where that OS/2 is installed.
For example,
copy a:\os2\DA2000.ADDc:\
2 Shutdown OS/2, then restart your computer.
ASUS PCI-DA2000 Series RAID Controllers Driver Installation
65
Advertisement
