AMC2 4W | Installation manual
5.10
Wiegand Interface for Card Readers
The AMC2 4W has four Wiegand interfaces to integrate up to
four card readers with Wiegand compatible interfaces. Each
interface is connected via a 10-pin pluggable screw connector
(S2, S7, S14 and S19).
Fig. 5.18 Location of the Wiegand interfaces for external devices
NOTE!
i
A complete connection diagram of the Wiegand interface is
shown in chapter Section 7.1 Connecting Diagrams of this docu-
mentation.
Bosch Sicherheitssysteme GmbH
Installing | en 43
F.01U.024.965 | V 0.1 | 2006.03