42 en | Installing
5.9
RS-485 Extension Module Bus
The RS-485 Extension Module Bus expands the AMC2 4W with
additional I/O modules (AMC 8I-8O or AMC 16I-16O). Up to
three expansion modules can be connected to provide addi-
tional in- and outputs, for example, for elevator control.
Fig. 5.17 Location of the RS-485 extension module bus
NOTE!
i
A complete connection diagram of the RS-485 extension mod-
ule bus is shown in chapter Section 7.1 Connecting Diagrams of
this documentation.
F.01U.024.965 | V 0.1 | 2006.03
AMC2 4W | Installation manual
Bosch Sicherheitssysteme GmbH