HUAWEI TE30 Videoconferencing Endpoint
User Guide
Parameter
Scheduled power-on time
Scheduled power-off
Scheduled power-off time
Step 2 Select Save.
When the TE30 is in sleep mode, the status indicator is still steady on.
----End
Follow-up Procedure
The TE30 wakes up from sleep mode once any operation is performed on it. For example, the
TE30 wakes up if there is an incoming call, you perform an operation on the remote control, or
you connect to the TE30 from its web interface.
When the automatic shutdown time arrives, the TE30 displays a dialog box and begins a 10-
second countdown. If you select No, the TE30 will not power off. If you select Yes, or do not
select any option within 10 seconds, the TE30 automatically powers off.
13.6 Setting Number Key Functions
You can configure the number keys on the remote control to implement two-stage dialing or
camera preset control.
When your TE30 is not in use during a conference and the full screen mode is adopted, the
number keys on the remote control do not support two-stage dialing and can only be used to
control camera presets.
Issue 01 (2013-03-27)
TIP
To directly place the TE30 in sleep mode, press
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Specifies the time when the
TE30 automatically powers
on.
The value format depends on
the value set for Time
format.
Specifies whether the TE30
automatically powers off at
specified time.
If you enable this function,
you must also set Scheduled
power-off time.
Specifies the time when the
TE30 automatically powers
off.
The value format depends on
the value set for Time
format.
on the remote control and select Sleep.
13 Maintenance
Setting
The default value is 0:0,
which corresponds to the 24-
hour value of the Time
format parameter.
The default value is Disable.
The default value is 0:0,
which corresponds to the 24-
hour value of the Time
format parameter.
126