Table of Contents
Advertisement
Getting to know the appliance
Here you can gain an overview of your new appliance's
components and functions.
No.
Designation
1
Glass ceramic cover
2
Wire grilling rack
3
Lava stones
4
Lava stone container
5
Switch
6
Indicator light
7
Grill element
8
Grill container (water bath)
Before using for the first time
In this section, you can find out what you must do before using
your grill to prepare food for the first time. Read the
information
section beforehand.
Cleaning
Clean the grill and accessories thoroughly before first use using
lukewarm soapy water.
Grilling with water and lava stones
Fill the grill container with water before each use. The amount of
water depends on whether or not you wish to use lava stones.
The lava stones store the heat of the grill element and thus ensure
intensive radiation of heat and even distribution of heat.
Safety
Your new lava stone grill
Switch and indicator light
Use the switch to set the heat output of the grill.You can adjust the
heat output infinitely variably. After grilling, turn the switch to 0 to
switch the appliance off.
The indicator light lights up when the grill is switched on.
Note. The grill is regulated by the grill element being switched on
and off. Even at maximum power, the grill element can switch on
and off.
Overheating protection
The overheating protection switches the grill heating off when the
grill overheats. When the grill has cooled down sufficiently, grill
heating switches on again automatically.
Heating the grill
Heat the empty grill for a few minutes at the highest setting. This
will eliminate the new odour. A slight development of smoke is
normal when the grill is used for the first time.
Filling with water and lava stones
Remove the wire rack and fold up the grill heating element.
1.
Take the lava stone container out of the appliance.
11
Advertisement
Chapters
Table of Contents
