Mitsubishi Electric KD Series User Manual page 46

3-2 Components (necessary to prepare separately)
3-2-1 Necessary to prepare separately
* DC24V cable and DC24V power supply are not
necessary for AX2-NLseries.
① DC5V power cable
② DC24V power cable
③ Camera Link® cable
* This product has
④ DC5V, DC24V power supply
⑤ Grabber board and PC
TM-XG537C
(for sensor)
(for illumination)
mini Camera Link® connector
COPYRIGHT © 2020 MITSUBISHI ELECTRIC CORPORATION. ALL RIGHTS RESERVED.
【 Necessary to prepare separately 】
Prepare the following items to use this product separately
by yourself.
1) DC 5V power supply (A3-unit MAX 3A) and cables
2) DC24V power supply (MAX 3A) and cables
3) Camera Link® cables
This product has mini Camera Link® connectors for
image transfer interface .
4) Frame Grabber board and its software
.
No Item
DC5V power cable
①
DC24V power cable
②
Camera Link® cable
③
DC5V, DC24V power supply
④
Grabber board and PC
⑤
【 Remark 】
1) This product doesn't contain the cables, Frame
grabber board, power supply listed above.
2) Current capacity is listed in the left table.
No Item
① DC5V
② DC24V
Camera Link® is a registered trademark of AIA(Automated Imaging Association)
Quantity
A3 A1 A0
1 1 1
1 2 2
1, 2 1, 2, 4 1, 2, 4, 6
1EA
1
Current capacity (A)
A3 A1 A0
3 6 9
1.0 1.5 2.0
46